Altruism Design

Also called Altruistic interaction design

Quick answer

Altruism design is the practice of building a product or interaction so that using it involves helping, or being helped by, another person. Designers do this by leaving the interaction loop deliberately incomplete, so that nobody can finish the task alone. The aim is to build social empathy, which may lead to more ethical behaviour.

~20 sec read

011 min

The problem Altruism Design addresses

Most interface design aims to remove the need for other people. A good product lets one person finish a task alone, quickly and without asking anyone. That is a real benefit, and it has a side effect. The product never gives the person a reason to notice anyone else.

Altruism design starts from that side effect. It asks whether an interaction could make helping another person part of the experience, instead of something that happens outside the product.

The term is narrow, and this article says so plainly. It comes from one research line in interaction design, and it has a small evidence base. It is not an established law or a widely replicated effect. Treat it as a design hypothesis with a few tested relatives.

022 min

How Altruism Design works

Interaction designers often describe a product as a loop. A closed loop is the usual pattern: a person acts, the product responds, and the cycle is complete without anyone else. Feedback loops of this kind are what make a product feel responsive and complete (see feedback loops).

Altruism design changes the structure of that loop and leaves the visual style alone. The designer removes one link, so that the loop closes only when a second person takes part. The authors describe the new structure as one that breaks the closed input-output cycle and makes it imperfect, so that people cannot experience it without seeking help from others or being helped by them.

The causal claim is in two steps. First, a person who has to ask for help, or give it, pays attention to another person. Second, that attention is expected to increase social empathy, and the researchers expect more ethical behaviour to follow. The first step is a design decision you can build. The second step is a hypothesis, and the published tests of it are small.

A different kind of friction

An incomplete loop adds effort on purpose. Most guidance treats added effort as a defect (see friction). Here the effort is the feature, because it is the point where two people meet. That is also why the idea needs care: effort that nobody chose can simply be a bad design.

031 min

Where Altruism Design comes from

Yeoreum Lee, Youn-Kyung Lim and Hyeon-Jeong Suk proposed the idea in 2011 under the name altruistic interaction design. The paper, "Altruistic Interaction Design: A New Interaction Design Approach for Making People Care More about Others", appeared in the proceedings of the Designing Pleasurable Products and Interfaces (DPPI) conference in Milan. The group was at KAIST in South Korea, and its project page dates the research to 2010 through 2013.

The paper opens from design ethics, which the authors say had gained increasing attention in human-computer interaction (HCI) in the years before. Their answer was a structural one: change the shape of the interaction, not only its message.

A later paper took the idea further. Kristina Mah and Luke Hespanhol of the University of Sydney presented "Embodying altruism in interaction design: towards moralising HCI" at OzCHI 2017. It proposes a framework called Mediated Tendency Towards Altruism (MeTTA), which sorts the parts of an HCI system so a designer can judge how strongly a design leans toward altruism. This article cites that paper for its existence and aim only, because its full text was not open for checking.

042 min

The Altruistic Fan and other tested designs

The original paper built one product to test the idea, called the Altruistic Fan. The authors report an exploratory user study of it, which means a first, small test of how people respond, not a measurement of effect size. The project page and abstract do not describe the fan's mechanism in detail, so this article does not either.

Other researchers have tested nearby ideas. None of them used the name altruism design, and each tested one narrow relative.

Touch delivered by a device

Haans and IJsselsteijn published a study in 2009 that tested whether a brief touch on the upper arm, which is known to raise helping behaviour, still works when a device delivers the touch. The touch condition got more agreement to help than the no-touch condition, but the difference was not statistically significant. A meta-analysis that combined the study with earlier published work found the effect had about the same size as a touch from a person. The result is weak evidence on its own, and it suggests a designer can carry a social cue through a device.

A nudge in a social robot's video

In 2021, Chenlin Hang, Tetsuo Ono and Seiji Yamada tested a nudge on 136 online participants. Participants watched a video from a social robot. Participants who saw the emotional peak of the video at the end gave more in a Dictator game than those who did not. The Dictator game is a standard test in which one person decides how to split money with an unseen stranger, and a larger gift counts as more altruistic. This is a nudge that acts on the order of content, and it never builds helping into the task.

Two prosocial games, no difference

In 2026, Elijah Emory-Muhammad compared two prosocial video games with 15 participants in a senior thesis at Claremont McKenna College. The two games did not differ in how much they led participants to give up their own share, and participants in both groups mostly chose fair splits. The study had a small sample and short play sessions, and the author says so. It still gives a useful warning: a design can look prosocial and move people toward fairness, not toward sacrifice.

051 min

Applying Altruism Design

Treat altruism design as a way to test one structural choice, not as a style. These moves follow from the loop model above.

  1. Find the loop.

    Write down the person's action, the product's response, and who is involved. If one person completes it, the loop is closed.

  2. Remove one link on purpose.

    Pick a step where another person could reasonably take part, such as confirming, handing over, or completing a shared result.

  3. Keep a way out.

    Let a person finish the task another way if nobody is available, so the design does not block them.

  4. Choose the stakes.

    Use it for low-stakes, optional experiences. Do not put it in front of urgent or safety-related tasks.

  5. Test the second step.

    Ask whether people actually act more helpfully afterward. A design can create contact between two people without changing what they do later.

061 min

When Altruism Design fails

Altruism design has three known risks, and the third is the most serious.

  • It can be read as manipulation. A design that engineers a feeling in someone raises the same objection as other behaviour-shaping designs (see choice architecture). Say what the design is doing, in plain words, where the person can see it.
  • It can measure the wrong thing. The games study found fairness, not sacrifice. A design may produce polite, equal behaviour and still not produce the generosity it aimed for.
  • It can exclude people. A product that cannot be used alone fails anyone with no one nearby, and anyone who cannot ask for help easily. That conflicts with the aim of accessibility. A way to finish alone is a requirement, not an option.

A tell that the design has failed: users find a way around the shared step, or they report the step as an obstacle without mentioning the other person.

071 min

Altruism Design vs. nearby concepts

Three concepts are often mixed up with altruism design. They differ on one axis: where the prosocial push comes from.

ConceptWhere the push comes fromWhat the designer changes
This pageAltruism designWhether a task needs a second personWhere the push comes from: The structure of the loop
PsychologyNudge theoryDefaults, order, framingWhere the push comes from: The way a choice is presented
PsychologyGamificationThe reward system around a taskWhere the push comes from: Points, goals and rewards

A nudge leaves the task alone and changes how an option looks. Gamification adds a reward layer. Altruism design changes what the task requires. The empathy gap is a different kind of concept: it describes how people misjudge feelings they are not having, and it is one reason a designer might want people to meet each other directly.

?6 questions

Questions people ask

What is altruism design?

Altruism design is an interaction design approach that builds helping into the product. It leaves the usual input-output loop incomplete so that people need each other to finish the experience. The term comes from Lee, Lim and Suk's 2011 work on altruistic interaction design.

What is an example of altruism design?

The Altruistic Fan is the example the original researchers built and tested in an exploratory user study. It is a product designed so that its use involves other people. Public descriptions do not give its mechanism in detail.

Does altruism design make people more altruistic?

No study has shown that clearly yet. The original work reports an exploratory user study, and related tests are small and mixed. A 2026 thesis with 15 participants found no difference between two prosocial game designs.

How is altruism design different from a nudge?

A nudge changes how a choice is presented, and altruism design changes what the task requires. A nudge keeps the task the same. Altruism design makes a second person part of it.

Can altruism design hurt accessibility?

Yes, if a task can only be finished with another person. People without anyone nearby, or who find asking hard, can be locked out. Offer another way to finish the task alone.

Is altruism design the same as gamification?

No. Gamification adds rewards such as points or levels around a task. Altruism design changes the structure of the task so that it needs help from or for another person.

▶3 videos

Watch

  • Understanding Altruism Design

  • Matthieu Ricard: How to let altruism be your guide

    TED

  • HUMAN DESIGN EMOTIONAL AUTHORITY EXPLAINED (AND HOW TO USE YOURS!)

    Human Design Revolution

§5 sources

Sources

Show all 5 sources
  1. Yeoreum Lee, Youn-Kyung Lim and Hyeon-Jeong Suk, Altruistic Interaction Design: a project page by the KAIST research group, 2010 to 2013, with the abstract of the DPPI 2011 paper ( ).

  2. Kristina Mah and Luke Hespanhol, Embodying altruism in interaction design: towards moralising HCI, OzCHI 2017 ( ).

  3. A. Haans and W. A. IJsselsteijn, The virtual Midas touch: helping behavior after a mediated social touch, IEEE Transactions on Haptics 2(3), 2009 ( ).

  4. Chenlin Hang, Tetsuo Ono and Seiji Yamada, Designing nudge agents that promote human altruism, 2021 ( ).

  5. Elijah Emory-Muhammad, Procedural Rhetoric and Prosociality: How Game Mechanics Shape Altruistic Decision-Making, Claremont McKenna College senior thesis, 2026 ( ).

Keep reading

More from Design

All of Design
All of Design

Missing a concept?

Tell us what to write next. We’ll email you when it’s live.

Several? Separate them with commas.

Only to tell you when it’s live.

How we use your email: privacy.